PRODUCT SPECIFICATIONS
Shingle-Shake System
Steel Shingle-Shake is intended for roof and sidewall installation on residential or commercial exterior applications in new construction and remodeling over proper underlayments.
Material Specifications – Metal Shingle-Shake
Shingle-Shake shall be coated with PVDF Fluoropolymer paint finish (Kynar 500 ® or Hylar 5000) and texture fabricated from G-90 galvanized steel coil, with both sides zinc-coated by the continuous hot dipped galvanized method.  Metal thickness shall be nominal 30 gauge with G-90 galvanize.
Tensile Strength (PSI) – 62,000
Yield Strength (PSI) – 50,000
Material Specifications – Metal Accessories
Shake accessories shall be coated with PVDF
Fluoropolymer finish. Texture fabricated with vel-vet embossing from G-90 galvanized steel coil with both sides zinc coated by continuous hot dip galvanized method. Metal thickness shall be nominal 28 gauge with G-90 galvanize.
Tensile Strength (PSI) – 62,000
Yield Strength (PSI) – 50,000
All accessories shall be color matched unless otherwise specified. Manufacturer’s guarantee is not valid unless ArrowLine accessories, where applicable to the job, are used and installation instructions, sheet metal practices and recommendations are followed. Accessories are packaged as required.
Material Specifications –Metal Shingle/ Valley Clip
Shingle and Valley Clips are manufactured from G-90 galvanized steel coil. Metal thickness nom. 26 gauge.